Aluminum Coated Fiberglass Self-Closing Wrap Sleeving Manufacturers,Cable Management Solutions

Enhanced High Temperature Resistant Fiberglass

An enhanced high-temperature resistant sleeving designed to protect wires and cables subjected to continuous temperature variations, vibration, abrasion, and mechanical stress.

Emi Wire Shielding Sleeve With Zipper

Zipper Shield sleeving made of a highly-flexible tinned copper shielding mesh using an internal shield overlap, a grounding strap and a heavy duty zipper wrap. It is not only providing excellent EMI shielding, but also could anti-noisy, flame-retardant and anti-abrasion.

Double Layer Braided Self Closing Sleeve

Double Layer Braided Self Closing Cable Sleeve

Double Layer Braided Self Closing Cable Sleeve are double layer design. Provides exceptional abrasion and flame resistance.Easy installation and maintenance is due to the side entry self-closing nature of this protective sleeving wrap.The inner layer is a different color than the outer layer to act as a warning for when the outer layer is breached.

Carbon Fibre Braided Sleeve for Industry

Braided Carbon Fiber Sleeve is a biaxial braid of precisely oriented fibers of maximum stiffness, torsial stability and compressive strength. The sleeve has a 45 degree orientation and will compress about 20-25% and tension about 60-65% from their base diameter. A biaxial braided sleeve easily and repeatedly expands open to fit over molding tools or cores. They can accommodate straight, uniform cross-section forms as well as non-linear, irregular cross section components.

High Temperature Heat Treated Fiberglass Braided Sleeve

Heat treated fiberglass sleeving is made of alkali-free fiberglass yarn braided into pipes and then bonded with small amount of Silane binder after high temperature dewaxing and fixed grain impregnation. The heat shield fiberglass tubing is mainly applied to insulate and heat equipment, such as motor, engine, plug wire, fuel lines, decorative light, etc.

Heat Reflective Aluminum Foil Coated Fiberglass Sleeve

Aluminum foil coated fiberglass sleeve special designed by laminating an aluminized metallic heat shield to a layer of strong and tight braided fiberglass yarn. A special manufacturing process permits the sleeve to boast a virtually seamless and non fraying construction. This aluminized fiberglass sleeve reflects more than 95% of the radiant energy that hits its surface, keeping the underlying cables, hoses and wires cool.

Silicone Rubber Coated Fiberglass Sleeving

Silicone Rubber Coated Fiberglass Sleeving made of fiberglass fiber and caoted with silicone resin. With good flexibility, insulation and chemical resistance, self-extinguishing. It widely applied to mechanisation,automobile,electrical,radio,office equipment and motor wireless device and other wiring insulation and mechanical protection.

Acrylic Coated Fiberglass Insulation Sleeving

Acrylic fiberglass sleeving made of non-alkali fiberglass fiber and caoted with acrylic resin.With good flexibility, insulation and chemical resistance, self-extinguishing. It widely applied on insulating protection of F grade lectrical machinery,home appliance,electric & heat equipment,special lightware etc.

Enhanced High Temperature Resistant Fiberglass

An enhanced high-temperature resistant sleeving designed to protect wires and cables subjected to continuous temperature variations, vibration, abrasion, and mechanical stress.

Emi Wire Shielding Sleeve With Zipper

Zipper Shield sleeving made of a highly-flexible tinned copper shielding mesh using an internal shield overlap, a grounding strap and a heavy duty zipper wrap. It is not only providing excellent EMI shielding, but also could anti-noisy, flame-retardant and anti-abrasion.

Double Layer Braided Self Closing Cable Sleeve

Double Layer Braided Self Closing Cable Sleeve are double layer design. Provides exceptional abrasion and flame resistance.Easy installation and maintenance is due to the side entry self-closing nature of this protective sleeving wrap.The inner layer is a different color than the outer layer to act as a warning for when the outer layer is breached.

Carbon Fibre Braided Sleeve for Industry

Braided Carbon Fiber Sleeve is a biaxial braid of precisely oriented fibers of maximum stiffness, torsial stability and compressive strength. The sleeve has a 45 degree orientation and will compress about 20-25% and tension about 60-65% from their base diameter. A biaxial braided sleeve easily and repeatedly expands open to fit over molding tools or cores. They can accommodate straight, uniform cross-section forms as well as non-linear, irregular cross section components.

High Temperature Heat Treated Fiberglass Braided Sleeve

Heat treated fiberglass sleeving is made of alkali-free fiberglass yarn braided into pipes and then bonded with small amount of Silane binder after high temperature dewaxing and fixed grain impregnation. The heat shield fiberglass tubing is mainly applied to insulate and heat equipment, such as motor, engine, plug wire, fuel lines, decorative light, etc.

Heat Reflective Aluminum Foil Coated Fiberglass Sleeve

Aluminum foil coated fiberglass sleeve special designed by laminating an aluminized metallic heat shield to a layer of strong and tight braided fiberglass yarn. A special manufacturing process permits the sleeve to boast a virtually seamless and non fraying construction. This aluminized fiberglass sleeve reflects more than 95% of the radiant energy that hits its surface, keeping the underlying cables, hoses and wires cool.

Silicone Rubber Coated Fiberglass Sleeving

Silicone Rubber Coated Fiberglass Sleeving made of fiberglass fiber and caoted with silicone resin. With good flexibility, insulation and chemical resistance, self-extinguishing. It widely applied to mechanisation,automobile,electrical,radio,office equipment and motor wireless device and other wiring insulation and mechanical protection.

Acrylic Coated Fiberglass Insulation Sleeving

Acrylic fiberglass sleeving made of non-alkali fiberglass fiber and caoted with acrylic resin.With good flexibility, insulation and chemical resistance, self-extinguishing. It widely applied on insulating protection of F grade lectrical machinery,home appliance,electric & heat equipment,special lightware etc.

Material	Aluminum foil+fiberglass fiber+polyester
Working temperature	-40℃ to 150℃
Heat insulation performance	≥100℃
Oil resistance	See GMW 14327 pass
Overlap	25%
Certificated	RoHS/ELV
Standard color	Natural
Size range	8mm~38mm
Cutting tool	Cutting machine,scissor

Part No	Inner Dia (mm)	Thickness of single layer(T) (mm)	Packing(L)
GF-AS-N-008-WH/SR	8.0	0.4	1m/pcs (can be cutted upon request)
GF-AS-N-010-WH/SR	10.0	0.5
GF-AS-N-013-WH/SR	13.0	0.5
GF-AS-N-016-WH/SR	16.0	0.5
GF-AS-N-020-WH/SR	20.0	0.7
GF-AS-N-025-WH/SR	25.0	0.7
GF-AS-N-032-WH/SR	32.0	0.7
GF-AS-N-038-WH/SR	38.0	0.7

what are you looking for?

Aluminum Coated Fiberglass Self-Closing Wrap Sleeving

Silicone Rubber Coated Fiberglass Sleeving

Heat Reflective Aluminum Foil Coated Fiberglass Sleeve

Cable Sleeving

Insulation Sleeve

Hook and Loop Fastener

Terminal Block

Cable Gland

Fiberglass sleeve

Aluminum Coated Fiberglass Self-Closing Wrap Sleeving

Silicone Rubber Coated Fiberglass Sleeving

Heat Reflective Aluminum Foil Coated Fiberglass Sleeve

Cable Sleeving

Insulation Sleeve

Hook and Loop Fastener

Terminal Block

Cable Gland