English
4:1 Waterproof Dual Wall Heat Shrink Tubing With Glue
Glue lined heat shrink made from co-extrusion of polyolefin and hot-melt adhesive,it was certificated by UL and CSA , RoHS compliant, formaldehyde free.
4:1 automobile special grade heat shrink tube, special white hot melt adhesive, better sealing, and keep your equipment safe for a long time.
Dual wall heat shrink tubing are good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.It widely used for industrial, ship, wire links, anti-rust and anti-corrosion protection.
What's special about glue lined heat shrink tubing?
1.Made of Polyolefin material and hot melt glue
2.4:1 Shrink Ratio (shrinks to 1/4 of its original Diameter)
3.Available in different sizes
4.Resists moisture, water, heat, and humidity
5.Longitudinal shrink ratio: ≤+8%
6.Out jacket flame retardant, inner adhesive self-extinguished
7.Super sealing against water, moisture or other contaminants
Physical Properties
| Material | Anti-aging polyolefin+hot melt adhesive |
| Shrink Ratio | 4:1 |
| Working Temperature |
-45℃ to 125℃ |
|
Start Shrink Temperature |
70℃ |
|
Minimum Complete Shrink Temperature |
125℃ |
|
Longitudinal Shrinkage |
8% |
|
Flammability |
VW-1 |
| Standard Color | Black |
| Colored | Available |
| Cutting Tool | Scissor |
Specification
| Part No | Size | Unshrink Size (mm) | After Shrunk Size(mm) |
Adhesive
Thickness
(mm)
|
||
| D | W.T | d | w.t | |||
| MJ-HST-D4-4.0 | Φ4.0 | 4.50±0.30 | 0.40±0.20 | ≦1.00 | 1.00±0.28 | 0.50 |
| MJ-HST-D4-8.0 | Φ8.0 | 8.60±0.30 | 0.40±0.20 | ≦2.00 | 1.20±0.28 | 0.50 |
| MJ-HST-D4-12.0 | Φ12.0 | 12.7±0.40 | 0.50±0.20 | ≦3.00 | 1.45±0.28 | 0.60 |
| MJ-HST-D4-16.0 | Φ16.0 | 16.7±0.50 | 0.60±0.30 | ≦4.00 | 1.90±0.38 | 0.75 |
| MJ-HST-D4-19. 1 | Φ19.1 | 19.7±0.50 | 0.60±0.30 | ≦4.80 | 2. 10±0.38 | 0.75 |
| MJ-HST-D4-24.0 | Φ24.0 | 25.0±0.60 | 0.75±0.35 | ≦6.00 | 2.45±0.55 | 0.75 |
| MJ-HST-D4-32.0 | Φ32.0 | 33.0±0.70 | 0.80±0.35 | ≦8.00 | 2.70±0.55 | 1.00 |
Application
Double wall heat shrink ideal for applications to seal or protect electrical splices, cable terminations and joints where electrical insulation and waterproof are required.
4 to 1 heat shrink tubing allows for connector-to-cable sealing and makes it possible to repair most damaged cable jackets without removing connectors.
