English
4:1 Waterproof Dual Wall Heat Shrink Tubing With Glue
Glue lined heat shrink made from co-extrusion of polyolefin and hot-melt adhesive,it was certificated by UL and CSA , RoHS compliant, formaldehyde free.
4:1 automobile special grade heat shrink tube, special white hot melt adhesive, better sealing, and keep your equipment safe for a long time.
Dual wall heat shrink tubing are good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.It widely used for industrial, ship, wire links, anti-rust and anti-corrosion protection
What's special about glue lined heat shrink tubing?
1.Made of Polyolefin material and hot melt glue
2.4:1 Shrink Ratio (shrinks to 1/4 of its original Diameter)
3.Available in different sizes
4.Resists moisture, water, heat, and humidity
5.Longitudinal shrink ratio: ≤+8%
6.Out jacket flame retardant, inner adhesive self-extinguished
7.Super sealing against water, moisture or other contaminants
Physical Properties
| Material | Anti-aging polyolefin+hot melt adhesive |
| Shrink Ratio | 4:1 |
| Working Temperature |
-45℃ to 125℃ |
|
Start Shrink Temperature |
70℃ |
|
Minimum Complete Shrink Temperature |
125℃ |
|
Longitudinal Shrinkage |
8% |
|
Flammability |
VW-1 |
| Standard Color | Black |
| Colored | Available |
| Certification | UL,ROHS,Reach,Halogen free |
| Shrinking Tool | Hot Gun,Oven |
| Cutting Tool | Scissor |
Specification
Nominal Size
(mm)
After Recovery(mm)
Part No
Packing Length(L)
Inner Diameter(I)
Wall Thickness(T)
Adhesive Thickness
MJ-HST-D4-004
4.0
1.0
1.0
0.4
200m/spool
MJ-HST-D4-006
6.0
1.5
1.1
0.4
100m/spool
MJ-HST-D4-008
8.0
2.0
1.5
0.5
50m/spool
MJ-HST-D4-012
12.0
3.0
1.7
0.5
1.22m/pc
MJ-HST-D4-016
16.0
4.0
2.0
0.5
1.22m/pc
MJ-HST-D4-020
20.0
5.0
2.3
0.6
1.22m/pc
MJ-HST-D4-024
24.0
6.0
2.5
0.6
1.22m/pc
MJ-HST-D4-032
32.0
8.0
2.8
0.7
1.22m/pc
MJ-HST-D4-052
52.0
13.0
3.0
0.7
1.22m/pc
Application
Double wall heat shrink ideal for applications to seal or protect electrical splices, cable terminations and joints where electrical insulation and waterproof are required.
4 to 1 heat shrink tubing allows for connector-to-cable sealing and makes it possible to repair most damaged cable jackets without removing connectors.
