English
2:1 Ultra Thin Wall Heat Shrink Tube
Ultra-thin wall heat shrink sleeves made from polyolefin, with a 2:1 shrink ratio, which is thinner than general heat shrink, have lower shrinking temperature and faster shrinkage speed, but keep the same functions.
Thin wire insulation heat shrink tubing is designed to be split resistant, cold flow resistant, mechanically tough, and easily marked. It is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire-harness covering, wire marking, wire bundling, component packaging, and fire-resistant covering.
Certifications
What's special about the ultra-thin wall heat shrink sleeves?
1. Made of Polyolefin material.
2. 2:1 Shrink Ratio (shrinks to ½ of its original diameter).
3. Fast shrinking and low shrink temperature.
4. Meets and exceeds lots of industrial standards.
5. Excellent physical, chemical, and electrical performance.
6. Flame retardant.
7. Available in different sizes and colors.
Physical properties
Material: Polyethylene
Shrink ratio: 2:1
Working temperature: -55℃ to 125℃
Start shrink temperature: 70℃
Storage temperature: ≤60℃
Minimum complete shrink temperature: 110℃
Longitudinal shrinkage: 5%
Standard color: Black
Certification: ROHS, Reach, Halogen-free
Cutting tool: Scissor
Specification
| Part No | Size | Unshrink Size (mm) | After Shrunk Size(mm) |
Packing
Length
(m/spool)
|
||
| D | W.T | d | w.t | |||
| MJ-HSTS0.7 | Φ0.7 | 1.0+0.3/-0.2 | 0. 18±0.05 | ≦0.40 | 0.32±0.08 | 400 |
| MJ-HSTS0.8 | Φ0.8 | 1.2+0.3/-0.2 | 0. 18±0.05 | ≦0.45 | 0.34±0.08 | 400 |
| MJ-HSTS1.0 | Φ1.0 | 1.5+0.3/-0.2 | 0. 18±0.05 | ≦0.60 | 0.36±0.08 | 400 |
| MJ-HSTS1.5 | Φ1.5 | 2. 1+0.3/-0.2 | 0. 18±0.05 | ≦0.80 | 0.36±0.08 | 400 |
| MJ-HSTS2.0 | Φ2.0 | 2.5+0.3/-0.2 | 0.20±0.05 | ≦1.00 | 0.42±0.08 | 400 |
| MJ-HSTS2.5 | Φ2.5 | 3.0+0.3/-0.2 | 0.22±0.05 | ≦1.25 | 0.46±0.08 | 400 |
| MJ-HSTS3.0 | Φ3.0 | 3.5+0.3/-0.2 | 0.22±0.05 | ≦1.50 | 0.46±0.08 | 400 |
| MJ-HSTS3.5 | Φ3.5 | 4.0+0.3/-0.2 | 0.22±0.05 | ≦1.75 | 0.46±0.08 | 200 |
| MJ-HSTS4.0 | Φ4.0 | 4.5+0.3/-0.2 | 0.22±0.05 | ≦2.00 | 0.46±0.08 | 200 |
| MJ-HSTS4.5 | Φ4.5 | 5.0+0.3/-0.2 | 0.23±0.05 | ≦2.25 | 0.46±0.08 | 100 |
| MJ-HSTS5.0 | Φ5.0 | 5.5+0.3/-0.2 | 0.25±0.05 | ≦2.50 | 0.50±0.08 | 100 |
| MJ-HSTS5.5 | Φ5.5 | 6.0+0.3/-0.2 | 0.25±0.05 | ≦2.75 | 0.50±0.08 | 100 |
| MJ-HSTS6.0 | Φ6.0 | 6.5+0.3/-0.2 | 0.25±0.05 | ≦3.00 | 0.55±0.10 | 100 |
| MJ-HSTS6.5 | Φ6.5 | 7.0+0.3/-0.2 | 0.25±0.05 | ≦3.25 | 0.55±0.10 | 100 |
| MJ-HSTS7.0 | Φ7.0 | 7.5+0.3/-0.2 | 0.25±0.05 | ≦3.50 | 0.55±0.10 | 100 |
| MJ-HSTS8.0 | Φ8.0 | 8.5+0.3/-0.2 | 0.28±0.06 | ≦4.00 | 0.58±0.10 | 100 |
| MJ-HSTS9.0 | Φ9.0 | 9.5+0.4/-0.2 | 0.28±0.06 | ≦4.50 | 0.58±0.10 | 100 |
| MJ-HSTS10 | Φ10 | 10.5+0.4/-0.2 | 0.28±0.06 | ≦5.00 | 0.58±0.10 | 100 |
| MJ-HSTS11 | Φ11 | 11.5+0.4/-0.2 | 0.28±0.06 | ≦5.50 | 0.58±0.10 | 100 |
| MJ-HSTS12 | Φ12 | 12.5+0.4/-0.2 | 0.28±0.06 | ≦6.00 | 0.58±0.10 | 100 |
| MJ-HSTS13 | Φ13 | 13.5+0.4/-0.2 | 0.28±0.06 | ≦6.50 | 0.58±0.10 | 100 |
| MJ-HSTS14 | Φ14 | 14.5+0.4/-0.2 | 0.28±0.06 | ≦7.00 | 0.58±0.10 | 100 |
| MJ-HSTS15 | Φ15 | 15.5+0.4/-0.2 | 0.28±0.06 | ≦7.50 | 0.58±0.10 | 100 |
| MJ-HSTS16 | Φ16 | 16.5+0.4/-0.2 | 0.28±0.06 | ≦8.00 | 0.58±0.10 | 100 |
| MJ-HSTS17 | Φ17 | 17.5+0.4/-0.2 | 0.28±0.06 | ≦8.50 | 0.58±0.10 | 100 |
| MJ-HSTS18 | Φ18 | 18.5+0.4/-0.2 | 0.32±0.08 | ≦9.00 | 0.68±0.10 | 100 |
| MJ-HSTS20 | Φ20 | 20.6+0.5/-0.2 | 0.32±0.08 | ≦10.0 | 0.68±0.10 | 100 |
| MJ-HSTS22 | Φ22 | 22.6+0.7/-0.2 | 0.35±0.08 | ≦11.0 | 0.72±0.12 | 100 |
| MJ-HSTS25 | Φ25 | 25.6+0.7/-0.2 | 0.40±0.10 | ≦12.5 | 0.78±0.12 | 50 |
| MJ-HSTS28 | Φ28 | 28.6+0.7/-0.2 | 0.40±0.10 | ≦14.0 | 0.78±0.12 | 50 |
| MJ-HSTS30 | Φ30 | 30.6+0.7/-0.2 | 0.40±0.10 | ≦15.0 | 0.82±0.12 | 50 |
| MJ-HSTS35 | Φ35 | 35.6+0.7/-0.2 | 0.45±0.10 | ≦17.5 | 0.92±0.12 | 50 |
| MJ-HSTS40 | Φ40 | 41.0+0.5/-0.5 | 0.50±0.12 | ≦20.0 | 1.00±0.15 | 50 |
| MJ-HSTS45 | Φ45 | 46.0+0.5/-0.5 | 0.50±0.12 | ≦22.5 | 1.00±0.15 | 25 |
| MJ-HSTS50 | Φ50 | 51.0+0.5/-0.5 | 0.55±0.15 | ≦25.0 | 1. 10±0.15 | 25 |
| MJ-HSTS55 | Φ55 | 55.5+1.0/-1.0 | 0.55±0.15 | ≦27.5 | 1. 10±0.15 | 25 |
| MJ-HSTS60 | Φ60 | 60.5+1.0/-1.0 | 0.60±0.15 | ≦30.0 | 1.25±0.20 | 25 |
| MJ-HSTS70 | Φ70 | 71.0+1.0/-1.0 | 0.60±0.15 | ≦35.5 | 1.25±0.20 | 25 |
| MJ-HSTS80 | Φ80 | 81.0+1.0/-1.0 | 0.60±0.15 | ≦40.0 | 1.25±0.20 | 25 |
Application
Thin wall wire sleeve heat shrink is ideal for a wide range of applications like electrical insulations, mechanical protection, and marking, like electrical insulation, wire bundling, color coding, lightweight harnessing, and wire strain relief.
