3:1Dual Wall Adhesive Lined Heat Shrink Tubing
Adhesive lined heat shrink tubing made from co-extrusion of polyolefin and hot-melt adhesive,it was certificated by UL and CSA , RoHS compliant, formaldehyde free.
3:1 automobile special grade heat shrink tube, special white hot melt adhesive, better sealing, and keep your equipment safe for a long time.
Glue lined heat shrink tubingare good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.It widely used for industrial, ship, wire links, anti-rust and anti-corrosion protection
What's special about adhesive heat shrink tubing?
1.Made of Polyolefin material and hot melt glue
2.3:1 Shrink Ratio (shrinks to 1/3 of its original Diameter)
3.Available in different sizes
4.Resists moisture, water, heat, and humidity
5.Longitudinal shrink ratio: ≤+8%
6.Out jacket flame retardant, inner adhesive self-extinguished
7.Super sealing against water, moisture or other contaminants
Physical Properties
Material | Anti-aging polyolefin+hot melt adhesive |
Shrink Ratio | 3:1 |
Working Temperature |
-45℃ to 125℃ |
Start Shrink Temperature |
70℃ |
Minimum Complete Shrink Temperature |
125℃ |
Longitudinal Shrinkage |
8% |
Flammability |
VW-1 |
Standard Color | Black |
Colored | Available |
Certification | UL,ROHS,Reach,Halogen free |
Shrinking Tool | Hot Gun,Oven |
Cutting Tool | Scissor |
Specification
Nominal Size
(mm)
After Recovery(mm)
Part No
Packing Length(L)
Inner Diameter(I)
Wall Thickness(T)
Adhesive Thickness
MJ-HST-D3-3.2
3.2
1.0
1.0
0.4
200m/spool
MJ-HST-D3-4.8
4.8
1.6
1.1
0.4
100m/spool
MJ-HST-D3-6.4
6.4
2.0
1.2
0.5
100m/spool
MJ-HST-D3-7.9
7.9
2.7
1.4
0.5
100m/spool
MJ-HST-D3-9.5
9.5
3.2
1.4
0.5
50m/spool
MJ-HST-D3-12.7
12.7
4.2
1.7
0.5
1.22m/pc
MJ-HST-D3-15.0
15.0
5.0
1.8
0.6
MJ-HST-D3-19.1
19.1
6.3
2.0
0.6
MJ-HST-D3-25.4
25.4
8.5
2.1
0.6
MJ-HST-D3-30.0
30.0
10.2
2.2
0.6
MJ-HST-D3-39.0
39.0
13.5
2.4
0.6
MJ-HST-D3-50.0
50.0
17.0
2.7
0.7
MJ-HST-D3-64.0
64.0
21.0
3.0
0.7
MJ-HST-D3-75.0
75.0
25.0
3.2
1.0
MJ-HST-D3-90.0
90.0
30.0
3.3
1.0
MJ-HST-D3-100.0
100.0
34.0
3.5
1.2
MJ-HST-D3-125.0
125.0
42.0
3.5
1.2
Application
Dual wall heat shrink ideal for applications to seal or protect electrical splices, cable terminations and joints where electrical insulation and waterproof are required.
3 to 1 heat shrink tubing allows for connector-to-cable sealing and makes it possible to repair most damaged cable jackets without removing connectors.